What are the advantage of polyester fabric (EP)rubber conveyor belt-SUNGDA Conveyor Belt
The polyester (EP) rubber conveyor belt is widely used in the bulk material industry. The structure of the polyester rubber belt is comprehensively processed by a multi-layer polyester, that is, EP (or polyester in the warp direction and polyest...
What are the hazards of heat-resistant EP conveyor belt surface damage
In recent years, the use of EP heat-resistant conveyor belts has become more widespread, especially in the ;mining, cement and steel industry. Although the conveyor belt looks very durable, it is actually a consumable. During continuous use...
How to achieve the best vulcanization effect as EP conveyor belt splicing
EP conveyor splicings cannot be used without vulcanization. Therefore, EP conveyor splicings need to be vulcanized before being put into use. However, to achieve the best vulcanization effect, some conditions are needed, such as temperature, time, an...
Why is the EP conveyor belt splicing section easy to crack and disconnect?
The strength at the splicing section of the EP conveyor belt is lower than that of the normal belt body. When mechanically connected, the strength of the splicing section can only reach 40-50% of the strength of the belt. When the quality of the cold...
How to Loading and storage of sidewall conveyor belt
Sidewall conveyor belts should be stored in a dry place away from direct heat and humidity. Long-term severe temperature changes can adversely affect the conveyor belt. The ideal storage environment is between 10-21 ° C. Long-term exposure to a tempe...
Steel cord conveyor longitudinal tear repair technology
Steel cord conveyor belt is generally used for the main lifting point of the conveyor, which is characterized by high speed and large lifting capacity. Most longitudinal tearing accidents of steel cord conveyor belts are caused by sharp-edged iron or...
What should be paid attention to when transporting and storing the conveyor belt
What should be paid attention to when transporting and storing the conveyor belt (1) Transportation of conveyor belt 1. The outer packaging of the conveyor belt protects the conveyor belt during handling and storage, so care must be taken not to da...
Three type of high-inclined belt conveyors
The conveying angle of ordinary belt conveyors is generally less than 20 °. In order to meet the requirements of conveying materials at different inclined angles, different types of large inclined conveyors are needed. Here are some common high-incli...
Comparison of flame resistance properties of different conveyor belts
Mine fires are one of the major disasters in coal mines. Mine fires not only cause huge material losses in the mines, but are also the main cause of casualties among miners. Fire can produce a lot of smoke. The main component of smoke in fires is car...
How to solve the abrasion problem of EP conveyor belts for mining
Mining EP conveyor belt wear will bring large economic losses to manufacturers. How to avoid conveyor belt wear is a topic that all manufacturers are concerned about. SUNGDA Conveyor Belt Co., Ltd. puts forward some suggestions to avoid conveyor belt...