Product Image
Product Description

What are the Basic Indicators that Determine the Quality of Conveyor Belts?

As an indispensable part of industrial production, the quality assessment of rubber conveyor belts involves multiple key indicators. In this article, we will focus on the three main indicators for rubber conveyor belt quality evaluation: Tensile str...

What is Conveyor Belt Tensile Strength and Elongation at Break?

In technical descriptions of rubber conveyor belts, we often encounter terms like elongation at break, full thickness elongation at break, and tensile strength. These parameters respectively represent what characteristics of the rubber conveyor belt...

What Are the Key Properties of T1, T2, T3, T4 Heat-Resistant Conveyor Belts?

In the technical description of conveyor belts, we often encounter T1, T2, T3, T4, and EPDM, which represent the performance of heat-resistant conveyor belts. What do these designations mean, and how are they different? Heat-resistant conveyor be...

What’s “kg/cm²” in Conveyor Belt and How Convert it into other Units?

In the realm of conveyor belts, parameters such as 150 kg/cm²,180 kg/cm², 240 kg/cm², or 1000 kg/cm² are frequently encountered. What do these units represent, and what aspect of conveyor belt performance do they describe? The unit kg/cm² denotes...

How to Calculate PIW of Conveyor Belt?

So why do we calculate PIW? This is because the strength of a conveyor belt, whether it’s the carcass tension rating or ultimate breaking strength, represents the amount of force that can be applied to the belt. For example, a 3 ply EP con...

How to Convert PIW Conveyor belt to EP Belt?

We all know that “PIW”is an imperial unit used to describe EP conveyor belts, such as 220 PIW/2, 330 PIW/3, or 440 PIW/4, representing Pounds Per Inch of Belt Width. This unit is commonly used in the conveyor belt markets of North and South Amer...

What is the difference between PSI and Mpa in conveyor belts and how to convert them to each other?

PSI (Pounds per square inch) is a unit of pressure measurement. “P” stands for pounds, “S” for square, and “I” for inch. In the United States, PSI is commonly used as a unit of pressure, representing pounds of for...

How to conduct conveyor belt troughing test

This standard specifies the test method and specifications for the performance of conveyor belts transitioning from flat to troughed, to achieve good contact with troughed carrying idler sets (referred to as troughability) during use. This test s...

The Most Comprehensive National and Organizational Conveyor Belt Testing Standards

Conveyor belts are used in a wide range of industries, so the quality of conveyor belts has become crucial. So how to determine whether the conveyor belt is qualified? What standards do qualified conveyor belts need to follow? Today, we will take yo...

What is the Difference between Heat-Resistant Conveyor belts and Fire-resistant conveyor belts?

In the realm of conveyor belts, we often encounter two distinct types: heat-resistant conveyor belts and fire-retardant conveyor belts, are these two types the same? If not, what sets them apart, and where are they respectively employed? Heat-Res...