What are the main dynamic characteristics of the conveyor belt?
The dynamic characteristics of the belt conveyor belt are mainly expressed in the following aspects: (1) The nonlinear characteristics of the stress and strain of the conveyor belt: when the conveyor belt is under tension, the relationship between th...
How to Choose the EP Layer Number and the Thickness of the Cover Rubber?–SUNGDA Conveyor Belt Co.,Ltd.
Everyone knows that the conveyor belt is composed of several layers. The top layer is covered with rubber, and the middle is the strong layer. Then, how to choose the number of strong layers and the thickness of the cover layer of the conveyor b...
How to adjust the tension of the conveyor belt
Due to the long-term use of the belt conveyor in the production process, the conveyor belt will be elongated and will cause some equipment failures. Therefore, check and adjust it before use to ensure the safe operation of the conveyor equipment. The...
How to choose the belt speed of linear belt conveyor correctly
Straight belt conveyor is the most widely used conveying equipment in the food industry. It can carry out horizontal conveying, inclined conveying and vertical conveying. In addition, the transmission line of the linear belt conveyor can be selected ...
Currently the most complete conveyor belt fault solutions
1.Startup and shutdown Conveyor should generally be started under no-load conditions. When a conveyor line with several belt conveyors is installed, a starter that can be locked should be used to start and stop in a certain order through the centrali...
How to analyze the deformation of the conveyor belt by ADAMS
Assuming that the rubber conveyor belt does not deform during its working, the motion equation of the test section of the conveyor belt can be defined according to the trajectory of the rigid test section. Define the system coordinates of the belt c...
Doing the following three points will make your conveyor belt run fast and stable
The axis of the drive conveyor pulley or tail conveyor pulley is not perpendicular to the conveyor centerline, causing the conveyor belt to deviate from the drive conveyor pulley or tail conveyor pulley. When the conveyor pulley is skewed, the tensio...
Problems and solutions that often occur during the use of rubber conveyor belts
Rubber conveyor belts are consumables, and various situations will occur during use. SUNGDA conveyor belt company summarizes them here. First, the conveyor belt slips. Slippage is a common situation. This problem is not caused by the quality of the c...
How to increase the conveyor inclination angle
The belt conveyor is driven by an electric roller, which drives the conveyor belt to run, thereby conveying materials. The belt conveyor has the advantages of large conveying capacity, low running resistance, low energy consumption, stable o...
Development trend of rubber flame resistant conveyor belt
With the development of the coal industry, a large number of large mines of 5 million tons or even more than 10 million tons have been built in succession, and the demand for large, high-strength, flame-resistant conveyor belts has been increasing. ...