Application and characteristics of endless rubber conveyor belt

The endless conveyor belt refers to the rubber conveyor belt after the production is completed, because of the use of the environment or conditions, vulcanization or mechanical splicing work cannot be carried out, and the endless conveyor belt must be used. The length of the endless conveyor belt is generally less than 50 meters, and most of the models of sidewall conveyor belt and chevron belt

The endless conveyor has the following characteristics:

1. The endless conveyor belt (circle conveyor belt) is made into a splicingless endless conveyor belt (circle conveyor belt) during the production process. Its characteristic is that the belt carcass and the surface of the conveyor belt have no splicing marks and no splicings Early damage will affect the service life. The conveyor belt has a smooth surface and uniform tension, so the conveyor belt runs smoothly and has a low elongation rate.

2. The strength of the belt carcass splicing of the endless conveyor belt can reach 90% of the strength of the belt body, and the surface of the conveyor belt has no obvious splicing defects. Therefore, the conveyor belt is balanced in transportation and has a small elongation. The carcass of the endless conveyor belt is made of high-quality cotton or woven cotton fabric, generally 2-6 layers or NN-200 nylon fabric (or polyester(EP) fabric) as the strong layer.

3. The length and limit deviation of the endless conveyor belt: The limit deviation and linear error of the endless conveyor belt length are small. The length of the conveyor belt is less than 15 meters. The length error is ± 5mm, the linear deviation is 1.5mm, and the length is more than 20 meters. The length error is ± 8mm, and the linear deviation is 2mm.

SUNGDA can produce ordinary, heat-resistant (≤120°C), cold-resistant (not lower than -40°C), acid- and alkali-resistant, and high-temperature resistant (not high At 150°C) and sanitary endless conveyor belt