The reason why the conveyor belt is getting longer and longer
Most users generally believe that the greater the elongation at break of the carcass material, the easier it is to “stretch” the conveyor belt. This is a very typical misunderstanding. It is related to the habit of using cotton fabric. He...
How to select the layers of heat resistant conveyor belt
The fabric conveyor belt is designed for conveying various items with special performance in different regions and under environmental conditions. The conveyor belt carcass structure is mainly for cold, oil, heat, high temperature, and chemical corro...
How to select the rubber conveyor belt correctly?
Conveyor belts account for 30% to 50% of the entire equipment cost of the conveyor. The correct choice of conveyor belts can not only reduce the equipment cost of the entire conveyor machine, but also affect the design of the conveyor’s pulley,...
Brief Analysis of Several Cases of Damage Treatment of Conveyor Cover Rubber
There are mainly the following situations for the damage treatment of the conveyor belt cover rubber: (1) Partial degumming, forming small pits. Mostly it is caused by the large amount of rocks and large pieces of raw coal in the underground. The hei...
Why the EP630/4 is the most porpular EP conveyor belt type ?
When choosing a conveyor belt model, we often see descriptions of EP315/3, EP630/4, EP400/3, EP800/4, EP1000/4, etc. What does this mean? We use EP630/4 as an example: EP630/4 conveyor belt is a strong layer often used in ep conveyor belts. E...
How to Choose the EP Layer Number and the Thickness of the Cover Rubber?–SUNGDA Conveyor Belt Co.,Ltd.
Everyone knows that the conveyor belt is composed of several layers. The top layer is covered with rubber, and the middle is the strong layer. Then, how to choose the number of strong layers and the thickness of the cover layer of the conveyor b...
How to analyze the deformation of the conveyor belt by ADAMS
Assuming that the rubber conveyor belt does not deform during its working, the motion equation of the test section of the conveyor belt can be defined according to the trajectory of the rigid test section. Define the system coordinates of the belt c...
Doing the following three points will make your conveyor belt run fast and stable
The axis of the drive conveyor pulley or tail conveyor pulley is not perpendicular to the conveyor centerline, causing the conveyor belt to deviate from the drive conveyor pulley or tail conveyor pulley. When the conveyor pulley is skewed, the tensio...
Problems and solutions that often occur during the use of rubber conveyor belts
Rubber conveyor belts are consumables, and various situations will occur during use. SUNGDA conveyor belt company summarizes them here. First, the conveyor belt slips. Slippage is a common situation. This problem is not caused by the quality of the c...
Development status of polyester (EP)conveyor belt
The high-strength polyester fabric (EP) conveyor belt is a new type of conveyor belt composed of polyester cloth as a stretch material and polyvinyl chloride plastic as a cover rubber. It has higher strength and more than ordinary conveyor belts. Goo...