The introduction of drive pulley.
The drive drum is the main component that transmits power. In order to transmit the necessary traction, there must be sufficient friction between the belt and the drum. According to the theory of friction transmission, when designing or selecting the...
How many types pulley?
The pulley can be divided into two types: the drive pulley and bend roller. The function of the drive pulley is to move the conveyor belt by frictional drive between the cylinder surface and the belt surface while changing the direction of movement o...
How many kinds of belt conveyors?
According to the characteristics of the installation, the belt conveyor can be divided into three types: fixed, mobile and rack retractable. Fixed belt conveyors are generally used in applications where the amount of conveyance is large and the servi...
How many types of common belt conveyors?
(1) Universal fixed type (TD series) ordinary belt conveyor. It is used in the general transportation of materials: most of the types are used in mine ground coal preparation plants and underground transportation roadways. (2) Pattern belt conveyor. ...
How many factors should consider when selecting belt speed of belt conveyor?
(1) Conveyor width: The smaller the EP conveyor belt width, the more unstable the high-speed operation, and even the possibility of serious material spreading, check the belt width at the time of purchase. (2) For fixed belt conveyors, the installati...
How much do you know about the shaft of roller?
The machining quality of the shaft is another important factor affecting the quality of the roller. Its own roundness will directly affect the radial runout and rotational resistance of the roller, which will ultimately affect the running life of the...
The conveyor belt does not run above and what is caused by the following misalignment?
The upper and lower sides of the conveyor belt are mutually influential and independent. In general, the lower side off tracking, and the upper side is normal. This is basically due to poor cleaning device, the material of the lower roller sticking t...
How about the joints vulcanization temperature?
The normal vulcanization crosslinking temperature of the rubber is determined by the vulcanizing agent and the accelerator in the rubber. In order to ensure the safety of the rubber processing, the general manufacturer does not set the vulcanization ...
How many kinds of conveyor belt splicing methods?
All conveyor belts must be connected in an endless shape to be used, so the quality of the conveyor belt joints directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly and smoothly. Common methods for con...
What is the different of heat resistant belt between Ep layer and cotton layer ?
a. The same point: the surface covering glue is the same. b. Different points: Cotton canvas can withstand the highest temperature of 150°C ; EP-TNG canvas can work under 200 °C for a long time and can be used at 220 °C. The heat resistance capabilit...