How to clean the oil paint on the surface of the EP rubber conveyor belt?

EP rubber conveyor belts often come into contact with the goods during use. Some cargo parts will be scattered on the EP conveyor belt. The solid logistics is better, please sweep it off, but for liquids, if it is not treated immediately, it will be stained with rubber conveyor belt. The surface is relatively difficult to clean. Let us take a detailed look at the cleaning method of the oil paint on the rubber conveyor belt.

Oil paint is a chemical mixture coating that has a strong, strong coverage and is, therefore, difficult to remove once it is applied. Usually, we know that the oil paint should use a chemical solvent that dissolves the oil paint, but this is not the case with rubber conveyor belts to avoid damage. The rubber conveyor belt is the main transmission component on the belt conveyor. Its normal use is also indispensable to the supporting roller. Therefore, if the rubber conveyor belt is replaced, you can understand the replacement technology of the roller, perhaps afterward, will be used.

Considering that it is necessary to be able to clear away oil paint and not damage the rubber surface of the conveyor belt, acetone or pyrrolidone can only be used. These two chemical solvents can meet the requirements. However, these solvents are very easy to cause damage to the skin, so wear latex gloves and masks when using them, and take appropriate protective measures. The reason why such a product can be designed is that the use of the roller set bracket as the angle steel can raise the rubber belt to the required height so that the roller assembly can be easily disassembled. This type of device is also convenient to carry, so as to better ensure the normal use of the conveyor belt idler.

SUNGDA  EP rubber conveyor belt series such as mining conveyor belt, heat resistant conveyor belt, and flame resistant conveyor belt adopt Continental conveyor belt technology, are developed to assure you of the high-quality rubber conveyor belt.

The combination of polyester in warp and nylon infilling provides technical low-stretch, high impact abuse resistance. Recommended for transporting abrasive materials, such as mining, rock, stone, ore, glass, granite, etc, for more information, please log on our website: or email us by