Types and functions of conveyor belt edges
The conveyor belt can also be divided into molded edge type and cut edge type. The belt carcass of the molded type has a small space from the edge of the conveyor belt, so that the belt carcass does not directly contact the outside world....
Calculation and Analysis of Material Bending Resistance on Horizontal Conveyor Belt
Under the gravity of the conveyor belt and the material, the conveyor belt forms a sag between the support rollers. This sag line is closer to the catenary line. When the conveyor belt moves, the material periodically deforms on this curve. The chara...
Currently the most complete conveyor belt fault solutions
1.Startup and shutdown Conveyor should generally be started under no-load conditions. When a conveyor line with several belt conveyors is installed, a starter that can be locked should be used to start and stop in a certain order through the centrali...
How to analyze the deformation of the conveyor belt by ADAMS
Assuming that the rubber conveyor belt does not deform during its working, the motion equation of the test section of the conveyor belt can be defined according to the trajectory of the rigid test section. Define the system coordinates of the belt c...
Problems and solutions that often occur during the use of rubber conveyor belts
Rubber conveyor belts are consumables, and various situations will occur during use. SUNGDA conveyor belt company summarizes them here. First, the conveyor belt slips. Slippage is a common situation. This problem is not caused by the quality of the c...
How to quickly repair scratches on conveyor belts
Rubber conveyor belt is an important part of conveying materials, mainly used for conveying solid materials in mining, metallurgy, steel, coal, hydropower, building materials, chemical industry, grain and other enterprises. Due to the poor quality of...
What are the advantage of polyester fabric (EP)rubber conveyor belt-SUNGDA Conveyor Belt
The polyester (EP) rubber conveyor belt is widely used in the bulk material industry. The structure of the polyester rubber belt is comprehensively processed by a multi-layer polyester, that is, EP (or polyester in the warp direction and polyest...
Rubber conveyor belt Cold Splicing vs Hot Vulcanizing Splicing-SUNGDA Conveyor Belt
In today’s splicing work for rubber conveyor belts, it seems that more and more belts are being transformed into thermal vulcanization. Engineers / end users claim that hot vulcanization belts are far superior to cold vulcanization belts, but ...
Pay attention to these details, the working life of the EP conveyor belt can reach at least 5 years
1. The relationship between the diameter of conveyor pulley and the layer of the EP conveyor belt, the matching of the drive pulley, the tail pulley, and the requirements for the trough angle of the conveyor bracket should be selected reasonably acco...
What is Abrasion Rate of Conveyor belt and How to Test It?
In the technical specifications of EP rubber conveyor belts or steel cord rubber conveyor belts, we often encounter values representing the abrasion of the conveyor belt, such as 150mm³ or 200mm³. These values indicate the abrasion resistance perfor...