Sungda Conveyor Belt Co.,Ltd.

The adjustment of the misalignment of the belt conveyor belt of the two-way operation is much more difficult than the adjustment of the misalignment of the one-way belt conveyor.

In the specific adjustment, one direction should be adjusted first, and then the other direction should be adjusted. When adjusting, carefully observe the relationship between the direction of belt movement and the trend of misalignment, and adjust them one by one. The focus should be on the adjustment of the drive roller and the redirecting roller, followed by the adjustment of the idler and the adjustment of the blanking point of the material.

At the same time, it should be noted that the belt should be evenly stressed in the longitudinal direction of the belt when the joint is vulcanized, and the forces on both sides should be as equal as possible when using the guide chain.