{"id":54,"date":"2014-04-10T21:34:40","date_gmt":"2014-04-10T13:34:40","guid":{"rendered":"http:\/\/www.sungda.com\/?p=54"},"modified":"2025-12-05T11:11:42","modified_gmt":"2025-12-05T03:11:42","slug":"steel-cord-conveyor-belt","status":"publish","type":"post","link":"https:\/\/www.sungda.com\/index.php\/steel-cord-conveyor-belt\/","title":{"rendered":"Steel Cord Conveyor Belt"},"content":{"rendered":"\n
\"steel<\/figure><\/div>\n\n\n\n

The steel cord conveyor belt<\/span><\/a><\/strong> consists of steel cord (ST800\/ST1000\/ST1250\/ST1400\/ST1600\/ST1800\/ST2000\/ST2250 etc.) and rubber covering,the production process includes steps such as steel cord weaving, rubber mixing, extrusion and vulcanization. Compared with EP conveyor belts, steel cord conveyor belts have higher tensile strength, abrasion resistance and corrosion resistance, more importantly, due to the super tensile strength of steel cords, they overcome the problems of easy deformation and overstretching of EP conveyor belts, so it is more suitable for long-distance, heavy-duty and high-speed transportation, widely used in mining industry, steel mill, seaports, building materials, metallurgy and other industries, especially in harsh environments and high-intensity working conditions.<\/span><\/p>\n\n\n\n

\"Steel<\/figure>\n\n\n\n

Characteristics:<\/span><\/h3>\n\n\n\n

1. High tensile strength: The belts are suitable for large span, long-distance transportation of materials.<\/span><\/p>\n\n\n\n

2. Small elongation in use: The belts need only a very short take-up stroke distance.<\/span><\/p>\n\n\n\n

3. The small diameter of drive pulley: The belt body has a layer of longitudinally arranged steel cords as its skeleton, and thus is resistant to flex fatigue. Therefore, a drive pulley of smaller diameter can be used to make the equipment smaller.<\/span><\/p>\n\n\n\n

4. High adhesion between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber used has the property of good adhesion with steel cords. Therefore, the rubber is tightly adhered to the steel cords and is resistant to shock and difficult to drop, so the rubber belts are long in life.<\/span><\/p>\n\n\n\n

5. Even tension of steel cords: Because of advanced techniques in manufacturing, the steel cords are very evenly arranged and have the same tension, so the belts are well-balanced in running and difficult to run awry.<\/span><\/p>\n\n\n\n

6. Good trough ability: As the belt body has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from escaping.<\/span><\/p>\n\n\n\n

7. Inspection of the belt with X-rays: Users can use X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.<\/span><\/p>\n\n\n\n

<\/p>\n\n\n\n

\"ST2000<\/figure>\n\n\n\n

Steel Cord Conveyor Belt Carcass:<\/span><\/strong><\/p>\n\n\n\n

\"CONSTRUCTION<\/figure><\/div>\n\n\n\n

Steel cord conveyor belt’s key to symbol:<\/span><\/strong><\/p>\n\n\n\n

\"Steel<\/figure>\n\n\n\n

Steel cord conveyor belt specification:<\/span><\/h3>\n\n\n\n

Strength grade<\/em><\/strong>

<\/td>
Tensile
strength
(N\/mm)<\/em><\/strong>

<\/td>
Steel Cord pitch
(mm)<\/em><\/strong>

<\/td>
Steel Cord diameter
(mm)<\/em><\/strong>

<\/td>
Min.breaking
force
(KN)<\/em><\/strong>

<\/td>
Min.cover
thickness
(mm)<\/em><\/strong>

<\/td><\/tr>

ST-500

<\/td>
500

<\/td>
10

<\/td>
2.5

<\/td>
5.5

<\/td>
4

<\/td><\/tr>

ST-630

<\/td>
630

<\/td>
10

<\/td>
2.8

<\/td>
7

<\/td>
4

<\/td><\/tr>

ST-800

<\/td>
800

<\/td>
10

<\/td>
3

<\/td>
8.9

<\/td>
4

<\/td><\/tr>

ST-1000
<\/td>
1000
<\/td>
12
<\/td>
3.4
<\/td>
12.9
<\/td>

4

<\/td><\/tr>

ST-1250
<\/td>
1250
<\/td>
12
<\/td>
3.8
<\/td>
16.1
<\/td>

4

<\/td><\/tr>

ST-1400
<\/td>
1400
<\/td>
12
<\/td>
4.3
<\/td>
18
<\/td>

4

<\/td><\/tr>

ST-1600
<\/td>
1600
<\/td>
12
<\/td>
4.7
<\/td>
20.6
<\/td>

4

<\/td><\/tr>

ST-2000
<\/td>
2000
<\/td>
12
<\/td>
5.0
<\/td>
25.6
<\/td>

4

<\/td><\/tr>

ST-2250
<\/td>
2250
<\/td>
12
<\/td>
6.6
<\/td>
29
<\/td>

4

<\/td><\/tr>

ST-2500
<\/td>
2500
<\/td>
15
<\/td>
6.8
<\/td>
40
<\/td>

5

<\/td><\/tr>

ST-2800
<\/td>
2800
<\/td>
15
<\/td>
7
<\/td>
44.8
<\/td>

5

<\/td><\/tr>

ST-3150
<\/td>
3150
<\/td>
15
<\/td>
7.3
<\/td>
50.5
<\/td>

5.5

<\/td><\/tr>

ST-3500
<\/td>
3500
<\/td>
15
<\/td>
8.2
<\/td>
56
<\/td>

6

<\/td><\/tr>

ST-4000
<\/td>
4000
<\/td>
15
<\/td>
8.8
<\/td>
63.5
<\/td>

6.5

<\/td><\/tr>

ST-4500
<\/td>
4500
<\/td>
16
<\/td>
9.7
<\/td>
76.3
<\/td>

7

<\/td><\/tr>

ST-5000
<\/td>
5000
<\/td>
17
<\/td>
10.9
<\/td>
91
<\/td>

7.5

<\/td><\/tr>

ST-5400
<\/td>
5400
<\/td>
17
<\/td>
11.3
<\/td>
98.2
<\/td>

8

<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
\"Cross-section<\/figure>\n\n\n\n
\"STEEL<\/figure><\/div>\n\n\n\n

Steel cord is the core component of steel cord conveyor belts, providing the strength and stability necessary to withstand high tension and repeated pulling forces. SUNGDA’s steel cord utilizes Contitech’s specialized \u201cHIXIH\u201d brand high-strength steel cord, enabling SUNGDA’s series of steel cord conveyor belts to meet the demands of long-distance, high-strength, and various adverse operating conditions. The steel cord has the following advantages:<\/p>\n\n\n\n

1.Zinc Galvanized and High Tension Open Type Steel Cord<\/strong><\/p>\n\n\n\n

Sungda selects its cord construction to provide the best specifications for particular applications. The cords are constructed to offer high flexibility, low elongation, and efficient, high-strength splice designs. The galvanized zinc coating serves as a bonding agent between the steel cord and skim rubber, providing a crucial barrier against corrosion.<\/p>\n\n\n\n

2.Limited Take-up Travel<\/strong><\/p>\n\n\n\n

Sungda belts elongate a maximum of 0.25% at rated tension. This allows for lower-cost take-up systems on many applications, making Sungda the preferred choice for long overland and short stacker\/reclaiming systems where minimum elongation is critical.<\/p>\n\n\n\n

3.Long Splice Life:<\/strong>
Our proven splicing methods, validated by dynamic splice testers, result in dynamic splice efficiencies exceeding the 50% rating defined in DIN 22131 Part 3. With proper technique, splices on Sungda belts should last the life of the belt.<\/p>\n\n\n\n

4.High Impact Resistance<\/strong><\/p>\n\n\n\n

Advanced cover compounds and skim rubber with superior adhesion combine to provide the impact, tear, and rip resistance demanded by your applications.<\/p>\n\n\n\n

5.Lower Cost-per-Ton<\/strong><\/p>\n\n\n\n

Fewer conveyors and splices, shorter take-ups, and reduced belt inventory lead to longer belt life, longer splice life, and reduced downtime. All these factors contribute to a lower cost-per-ton of material conveyed, making a significant improvement in your bottom line.<\/p>\n\n\n\n

\"steel<\/figure><\/div>\n\n\n\n

<\/p>\n\n\n\n

 Steel Cord Conveyor Belt Specification(PIW):<\/span><\/h4>\n\n\n\n
Type<\/em><\/strong><\/td>Minimum
UItimate
Tension
(PIW)<\/em><\/strong><\/td>		Operating
Tension
(PIW)<\/em><\/strong><\/td>		Cable
Diameter
(in)<\/em><\/strong><\/td>		Cable Pitch
(in)<\/em><\/strong><\/td>

Belt
Modulus
(PIW)<\/em><\/strong>

<\/td><\/tr>
ST800<\/td>4568<\/td>685<\/td>0.142<\/td>0.688<\/td>

329000

<\/td><\/tr>
ST1000<\/td>5710<\/td>856<\/td>0.142<\/td>0.547<\/td>

411000

<\/td><\/tr>
ST1250<\/td>7138<\/td>1070<\/td>0.205<\/td>0.855<\/td>

514000

<\/td><\/tr>
ST1600<\/td>9136<\/td>1370<\/td>0.205<\/td>0.666<\/td>

657000

<\/td><\/tr>
ST2000<\/td>11420<\/td>1712<\/td>0.205<\/td>0.533<\/td>

822000

<\/td><\/tr>
ST2500<\/td>14275<\/td>2140<\/td>0.205<\/td>0.450<\/td>

1030000

<\/td><\/tr>
ST3150<\/td>17987<\/td>2697<\/td>0.315<\/td>0.768<\/td>

1290000

<\/td><\/tr>
ST3500<\/td>19985<\/td>2996<\/td>0.315<\/td>0.690<\/td>

1440000

<\/td><\/tr>
ST4000<\/td>22840<\/td>3424<\/td>0.362<\/td>0.792<\/td>

1640000

<\/td><\/tr>
ST4500<\/td>25695<\/td>3852<\/td>0.394<\/td>0.805<\/td>

1850000

<\/td><\/tr>
ST5000<\/td>28550<\/td>4280<\/td>0.433<\/td>1.098<\/td>

2050000

<\/td><\/tr>
ST5400<\/td>30835<\/td>4623<\/td>0.433<\/td>1.023<\/td>

2220000

<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

 Steel Cord Conveyor Belt’s Cover Grade:<\/span><\/strong><\/p>\n\n\n\n

Rubber Cover Type<\/em><\/strong><\/td>Characterization<\/em><\/strong><\/td>Tensile
Strength
in Mpa(min)<\/em><\/strong><\/td>		Elongation
at break
%(min)<\/em><\/strong><\/td>		Abrasion
in  mm\u00b3
(max)<\/em><\/strong><\/td>		Hardness
in SHA<\/em><\/strong><\/td>

Basic
Material<\/em><\/strong>


<\/td><\/tr>
DIN – X<\/td> Extreme abrasion resistance,superior resistance to cutting & tearing<\/td>25<\/td>450<\/td>120<\/td>60\u00b15<\/td>

NR\/SBR

<\/td><\/tr>
DIN – Y<\/td>Excellent Impact and abrasion resistance<\/td>20<\/td>400<\/td>150<\/td>60\u00b15<\/td>

NR\/SBR

<\/td><\/tr>
DIN – W<\/td>Good abrasion resistance,superior resistance to cutting & tearing<\/td>18<\/td>400<\/td>90<\/td>60\u00b15<\/td>

NR\/SBR

<\/td><\/tr>
DIN – Z<\/td> Normal abrasion resistance and cutting & tearing resistance<\/td>15<\/td>350<\/td>250<\/td>60\u00b15<\/td>

NR\/SBR

<\/td><\/tr>
DIN – K<\/td>  Flame Retardant (M HSA)<\/td>15<\/td>350<\/td>200<\/td>60\u00b15<\/td>

CR

<\/td><\/tr>
G<\/td>  Oil Resistant<\/td>15<\/td>400<\/td>200<\/td>60\u00b15<\/td>

NBR

<\/td><\/tr>
C<\/td>  Chemical Resistant<\/td>15<\/td>400<\/td>250<\/td>60\u00b15<\/td>

CR\/IIR

<\/td><\/tr>
E<\/td>  Anti-Static<\/td>15<\/td>400<\/td>200<\/td>60\u00b15<\/td>

NR\/SBR

<\/td><\/tr>
HR<\/td>  Heat Resistant+100\u2103~+175\u2103<\/td>15<\/td>400<\/td>200<\/td>60\u00b15<\/td>

SBR\/EPDM

<\/td><\/tr>
RMA – I<\/td> High abrasion resistance,superior
  resistance to cutting &tearing<\/td>		17<\/td>450<\/td>200<\/td>60\u00b15<\/td>

NR\/SBR

<\/td><\/tr>
RMA – II<\/td>  Resistant to cuts and gouges,
  flexible at lower temperatures<\/td>		14<\/td>400<\/td>250<\/td>60\u00b15<\/td>

NR\/SBR

<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
\n
SEND YOUR INQUIRY<\/strong><\/a><\/div>\n<\/div>\n\n\n\n
\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

The Top 5 Rubber Conveyor Belt Manufactures In China 2024<\/strong><\/a><\/p>\n\n\n\n

How to choose crushing plant conveyor belt for 100 ~ 1000T\/H scale?<\/a><\/strong><\/p>\n\n\n\n

EP conveyor belt layer is the more the better?<\/a><\/strong><\/p>\n\n\n\n

How to choose the cover thickness of conveyor belt?<\/a><\/strong><\/p>\n\n\n\n

<\/p>\n<\/div><\/div>\n\n\n